KlarPool 5L

Spores from microorganisms are transported through the air, and inevitably enter the pool water. The surrounding environment – high temperatures, excessive rain and extensive pool activity – also affects the development of deposits in the pool. KlarPool prevents the pool from becoming slippery and accumulating deposits on the bottom and sides.

Start dosage: Add 1 dl KlarPool per 10,000 litres of water each week.
Preventive dosing: Add 0.5 dl KlarPool per 10,000 litres of water each week.
If the problem has already occurred: If there are deposits on the bottom and sides of the pool, you must first disinfect the water with a shock treatment of either Hurtigklor (1701) or OxyChock (1784) prior to using KlarPool.

First, mix KlarPool with water in a clean plastic container. Then add the solution along the edge of the pool.
After frequent swimming, high temperatures or after storms, we recommend a higher dosage.

To achieve the maximum effect from our water care products, we recommend a pH value of between 7.0 and 7.4 If the pH is above 7.4, it must be lowered using pH-Minus. If the value is below 7.0, it must be raised using pH-Plus. You can easily measure the pH value using Swim & Fun Test Strips (1537).

Please note that chlorine consumption can vary depending on water temperature, the frequency and duration of swimming, and the weather.  Store the product in the original packaging, out of the reach of children, in a frost-free place and away from direct sunlight.

Safe use of biocide products. Biocides should be used with caution. Read the label and instructions for use before using the product.