OxyChock Chlorine Free 1 kg

OxyChock chlorine-free granulate is used to shock treat water when the pool is filled for the first time, and to shock treat water with problems. During hot weather, we recommend shock-treating pool water about every two weeks. You can swim in the pool relatively shortly after adding OxyChock. OxyChock can also be used for maintenance disinfection. OxyChock must always be used in combination with Aktivator (1735), which significantly prolongs and increases the disinfectant effects of OxyChock . The ideal oxygen content in swimming water is between 3 and 5 mg per litre.

Healthy swimming water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. If the pH value of the water is not within this range, adjust it, using pH-Plus and pH-Minus, respectively.

Use the lid as a measuring cup:
The lid of this product acts as a measuring cup, so you can easily and accurately measure the correct amount.

Dose per 10,000 litres of water:
Initial dose: Add 200 gr of OxyChock. . This corresponds to the line for 200 ml, if you use the product lid as a measuring cup.
Problems with pool water: Add 250 gr of OxyChock. It is equivalent to a filled lid without a top if you use the lid as a measuring cup.
Daily dose: Add 20 gr of OxyChock per day. This corresponds to 1½ level tablespoons.

Alternatively, for easy water care, we recommend adding 3 non-chlorine Swim & Fun CombiTabs every day. Fill a clean bucket with water. Dissolve OxyChock granules in the bucket. Then add the solution along the edge of the pool. Note that OxyChock disinfects very efficiently, but only for a short time. So the OxyChock content can only be measured in the water about 4 hours after dosing. This means that you can swim relatively shortly after adding OxyChock.

Make sure chemicals do not get damp during storage. Store in original packaging, locked and out of the reach of children in a dry frost-free place away from direct sunlight.