Aktivator 1L

If you have chosen to use chlorine-free OxyChock to maintain your pool or spa water, you must combine it with Aktivator, which increases and prolongs the disinfectant effect of OxyChock.

Dosage:
Initial dose: Add 1 dl/100 ml of Aktivator and 100 gr of OxyChock per 10,000 litres of water. Fill a clean plastic bucket with water and add Aktivator. Distribute the solution along the edge of the pool
Ongoing care: Add 1/4 dl Aktivator and 40 gr Oxychock per 10,000 litres of water every 3 days.

Healthy pool water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. If the pH value of the pool water is not within this range, adjust it, using pH-Plus and pH-Minus, respectively.

Use the lid as a measuring cup:
The lid of this product acts as a measuring cup, so you can easily and accurately measure the correct amount.
Store the product in the original packaging, out of the reach of children, in a frost-free place and away from direct sunlight.

Store in original packaging, locked and out of the reach of children in a dry frost-free place away from direct sunlight. 

Be careful when using biocides. Always read the label and product instructions before use. Biocides should be used with caution. Read the label and instructions for use before using the product.