Frisbee FX2 Pool Robot

Frisbee is a small and practical cable-less pool robot that vacuums pool bottoms of up to 25m2 and 2 meters deep in a 40-60 minute cycle, and is very easy to clean. 

Sit back and relax while this pool robot copes with the rough work of vacuum cleaning the bottom of the pool. Frisbee is a cable-less pool robot that is designed for pools with a flat bottom, and is also suitable for saltwater pools.

It is able to vacuum the bottom of pools with a size of up to 25m2 and 2 meters deep in a 40-60 minute cycle. It is able to suck up particles as small as 0.18 mm in size, and returns to the pool edge before the battery runs out. This means that you can easily lift it out of the water using the floating rope that is attached to the Frisbee pool robot.

The fact that it has no cable makes it especially easy to pack away and put on charge. It takes about 6-8 hours to charge after which it is ready to go on an adventure in the pool again. 

Cleaning the Frisbee is incredibly easy; Open up the robot, rinse it out with a hose, and then it is clean and ready for use again.

The Frisbee likes being in the water and does not like being switched on when it is not submerged. An additional built-in safety function ensures that there is an audible signal when it surfaces and is still switched on.Please note that the pool robot is intended for the general maintenance of pool bottoms.

The filter system removes even the very smallest particles, and combined with water care products ensures that you get crystal clear water. Use a manual bottom suction for corners and stairs. 

Swedish test winner - "Best Budget"
https://test-piloterna.se/test/tradgard/poolrobot-test/

Warranty information:
This robot is for private use only. If the machine is used commercially, the warranty time is 90 days. 

Specifications
For cleaning: Floors (horizontal surfaces)
Volt: Chargeable
Cord: Cordless
Surface types: Vinyl Liner
Auto-Off: Yes
Cleaning cycle: 40-60 Minutes
Max. pool size, m2: 25
Max. pool depth, m: 2
Smart Navigation: Yes
Control via remote control: No