Spa PipeFix 1L

Use Swim & Fun SPA PipeFix for cleaning pipe systems in hot tubs. Body grease and dead skin cells get deposited in the pipes, allowing bacteria to thrive. Over time, a biofilm forms, which is a breeding ground for bacteria and germs. PipeFix removes this biofilm and cleans the pipe system.

We recommend that you clean the pipe system twice to 4 times per year. Instructions for use: Dosage: 500 ml per 1,000 litres of water. Prior to the treatment, disinfect your hot tub in the normal way. The water line must be at least 5 cm above the nozzles. Shake the bottle well. Now add the correct quantity of PipeFix to the filled hot tub and switch on the circulation pump. If possible, remove the filter first. After 30 minutes, switch off the circulation pump and empty the hot tub. Now thoroughly rinse the hot tub with clean water.

Important: Never bathe in your hot tub in water containing PipeFix.

Make sure chemicals do not get damp during storage. Store in original packaging, locked and out of the reach of children in a dry frost-free place away from direct sunlight. Biocides should be used with caution. Read the label and instructions for use before using the product.

Use the lid as a measuring cup:
The lid of this product acts as a measuring cup, so you can easily and accurately measure the correct amount.

ATTENTION!
Remove any filters and neck pillows before adding SPA Pipefix to the bath water!

WARNING

Causes skin irritation. (H315) Causes serious eye irritation. (H319) Very toxic to aquatic life. (H400) Toxic to aquatic life with long lasting effects. (H411) If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wash hands/exposed skin thoroughly after handling. Wear protective gloves/protective clothing. Dispose of contents/container to an approved waste disposal plant.

IF IN EYES: Rinse cautiously withwater for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

1 L