Spa CleanTab 5 g, 1 kg

CleanTab tabs dissolve rapidly to maintain a high standard of water hygiene in hot tubs (indoors and outdoors) and whirlpools from 500 to 1,000 litres.

Instructions for use: Adjust the pH of the swimming water to 7.0-7.4. This provides the most pleasant water sensation and optimal disinfection. Healthy pool water has a pH value of between 7.0 and 7.4. To get the best use out of our water care products, make sure you maintain a healthy water balance. If the pH value of the pool water is not within this range, adjust it, using pH-Plus and pH-Minus, respectively.

Dosage: For new filling: Add 2 CleanTabs 5 per 1,000 litres of swimming water. You must then measure the swimming water regularly and keep the chlorine content between 2 and 3 ppm (mg per litre).

Please note that chlorine consumption can vary depending on water temperature, the frequency and duration of swimming, and the weather.
Make sure chemicals do not get damp during storage. Store in original packaging, locked and out of the reach of children in a dry frost-free place away from direct sunlight.

We recommend dissolving CleanTabs in a clean plastic container of water. First add water. Pour the solution into the water in the hot tub while the circulation pump is running. Alternatively, you can use a floating chlorine dispenser. Note. You must use a dispenser in the closed position. Let the circulation run for 20 minutes after adding. We recommend adding water care products after swimming.
It is important to disinfect the hot tub’s pipe system on a regular basis. Use Swim & Fun PipeFix (1745). Remember also to clean the hot tub filter every 2-3 weeks. Use Swim & Fun FilterFix (1744).

Biocides should be used with caution. Read the label and instructions for use before using the product.