Liner Repair Set

With this practical repair kit you can patch the liner without emptying the pool, and the repair kit also works on dry surfaces. Contains repair patches, glue apply stick and glue for use on PVC foil.

The procedure is simple: Thoroughly clean the surface around the area to be repaired. Cut a patch to the shape and size required. Your patch should be 2 cm larger than the hole all the way around. Round off any corners to prevent the patch from peeling off. Apply vinyl adhesive to the patch.

Inflatable pools: Apply a thin, even layer of adhesive all over the patch. Vinyl pool liners: Apply a generous, even layer of adhesive all over the patch. Place the patch over the hole.

To affix under water, fold the patch with the adhesive on the inside. Hold the patch close to the hole. Now unfold the patch under the water and affix immediately to the hole. Press out any trapped air bubbles. If possible, apply a weight to the patch. The bond will achieve full adhesion within 24 hours.