Swim & Fun
Solarboard Heater
Material | Plastic |
Color | Black |
Description
With a SolarBoard from Swim & Fun, you will quickly bring the bathing water in the garden pool up to a pleasant temperature. A SolarBoard increases the water temperature by up to 5°C, depending on the number of hours of sunlight and the strength of the sun. The solar heater is especially suitable for small pools up to 5000 L with a filter system and can be installed individually or as several connected together when using with bigger pools.
The support legs of the SolarBoard ensure it has an optimal angle of 30° in order to attract the most heat-generating rays.
When the cold water passes through the internal piping, it is heated by the sun's rays and then heads back to the garden pool. The heating depends on the number of hours of sunlight and the strength of the sunlight, as well as the water flow rate.
We recommend the use of a by-pass kit (1572) and summer cover with a thermal function in order to best minimise the loss of heat. A by-pass kit allows you to direct the water past the solar heater at night and on grey days when there is not much sun. If the heated water passes through the solar heater at night, it will quickly be cooled down again, and then you will start all over again the next day.
It is also a good idea to protect the surface of the water with a thermal cover, in order to reduce the heat loss from there. And the more shelter from the wind you can give the garden pool the better. The wind also helps to cool the water.
When connecting multiple SolarBoards together you must also use a by-pass kit.
This SolarBoard can be used for integrated, in-ground and free-standing pools.
Specifications:
Item number: 1923
Max. pool volume, l: 5000
Dimensions (L x W x H): 110 x 69 x 14 cm
Maximum pressure: 1 bar at 20 ° C
Water quantity: max 10,000 L/h
Collected water content: 15 L