HotSplash Heat Pump 3.5kW

Environmentally friendly, lightweight heat pump which you can easily install yourself. At the same time the low noise level of 55 dB does not interfere with the bathing experience and just four control buttons make the heat pump very easy to operate.

The HotSplash is maintenance-free and covered in a UV-resistant, stainless polymer material with an aluminium heat exchanger that is resistant to corrosion from pool chemicals such as chlorine and salt.

Works with both low-current circulation pumps and more powerful sand filter systems. Comes with an RCD integrated mains plug, 3 metres of cable, 2 metres of pool hose and 32 mm hose couplings.

The heat pump collects energy from the air and transfers it to the pool water. In fact, an entire 50% of the energy produced by the heat pump is collected from the air.

Swim & Fun HotSplash is a very compact Plug & Play version, and you simply connect the hoses and plug it in. Getting hot water in the garden pool is as simple as that. At the same time the low noise level of 55 dB does not disturb the bathing experience. Only 4 control buttons makes the heat pump very easy to operate.

Remember the thermal cover. It is vital for retaining the heat that has been built up overnight.

Technical data
Model 1056

Air 27°C, Water 26°C, Humidity 80%
Heat Output (kW) kW; 3,75
Power consumption (kW) kW; 0,56
COP ; 5,73

Air 10°C, Water 26°C, Humidity 70%
Heat Output (kW) kW; 1,85
Power consumption (kW) kW; 0,56
COP ; 3,74

Max. pool size (with pool thermo cover) m³ * ; 12
Recommended pool size (with pool thermo cover) m³*; 5-8*
Temperature setting range (heating), °C: 20-40
Air flow m3/t; 700
Water pipe in-out mm; 32
Condensator ; Titanium
Sound level (2 m) dB(A); 55
Refrigerant type ; R32
Refrigerant weight kg; 0,3
Minimum air temperature tolerance (air), °C: 10
Maximum air temperature tolerance (air), °C: 43
Net weight kg; 15
Gross weight kg; 16
Net dimensions mm; 290 x 310 x 370
Gross dimensions mm; 310 x 360 x 385

* From May to August completely insulated, with pool cover, out of the wind and in the sun.

How to find the right heat pump
It is necessary to understand that the heat capacity and the performance of the pump depend on the climate you live in. Areas with cold climates have a shorter swimming pool season. Therefore, hot pool water in the north requires heat pumps with higher capacity than in medium to warmer climates. 

 The illustration is an approximate estimate of the climate differences, and thus an indication of what type of heat pump you should consider buying to get the right performance.